On the split common fixed point problem for strict quasi-ϕ-pseudocontractive mappings in Banach spaces

Numerical Algorithms - The purpose of this paper is to propose an algorithm for solving the split common fixed point problem for strict quasi-?-pseudocontractive mappings in Banach spaces. It...     

Hopf–Hopf bifurcation analysis based on resonance and non-resonance in a simplified railway wheelset model

Nonlinear Dynamics - This paper mainly investigates the dynamics of the non-resonant and near-resonant Hopf–Hopf bifurcations caused by the interaction of the lateral and yaw motion in a...     

U71Mn钢轨气压焊焊接接头滚动磨损与损伤性能研究

研究了U71Mn钢轨气压焊焊接接头上各区域的组织与性能，并利用MMS-2A轮轨滚动磨损与接触疲劳试验机对焊接接头材料进行试验，分析了各区域的磨损与损伤特性. 结果表明:焊接接头组织为珠光体，但晶粒大小及渗碳体形态和大小存在差异. 焊缝中珠光体晶粒较小，渗碳体呈细小片层状及细小颗粒状，因此硬度高且塑性变形能力强. 在1×105和2×105循环次数时耐磨性优于母材，在3×105循环次数时，焊缝磨损量大于母材磨损量，且焊缝表面损伤较母材严重. 在焊缝两侧各有1个区域(软化区)，组织为粒状珠光体和少量片层状珠光体，颗粒大小和片层厚度不均匀，硬度较小，磨损量较大，塑性变形层较厚，表面损伤最严重.      

Spectrum of Single-Photon Scattering in a Strong-Coupling Hybrid Optomechanical System

The single-photon excitation and transmission spectra of strong-coupling hybrid optomechanics are theoretically analyzed, where a two-level system (TLS) is coupled to a mechanical resonator (MR), generating Jaynes–Cummings-type polariton doublets. In this model, both the optomechanical coupling and the TLS-MR coupling are strong. In this parameter region, polaron-assisted excitation reemission processes can strongly affect the single-photon excitation and output spectra of the cavity. It is found that the fine structure around each sideband can be used to characterize the TLS-MR and the effective TLS-photon couplings, even at the single-quantum level. Thus, the spectrum structures may make it possible to sensitively probe the quantum nature of a macroscopic mechanical element. A possible approach for tomographic reconstruction of the state of a TLS, utilizing the single-photon transmission spectra, is further provided.     

聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

Novel biogeography-based optimization algorithm with hybrid migration and global-best Gaussian mutation

The Biogeography-Based Optimization algorithm and its variants have been used widely for optimization problems. To get better performance, a novel Biogeography-Based Optimization algorithm with Hybrid migration and global-best Gaussian mutation is proposed in this paper. Firstly, a linearly dynamic random heuristic crossover strategy and an exponentially dynamic random differential mutation one are presented to form a hybrid migration operator, and the former is used to get stronger local search ability and the latter strengthen the global search ability. Secondly, a new global-best Gaussian mutation operator is put forward to balance exploration and exploitation better. Finally, a random opposition learning strategy is merged to avoid getting stuck in local optima. The experiments on the classical benchmark functions and the complexity functions from CEC-2013 and CEC-2017 test sets, and the Wilcoxon, Bonferroni-Holm and Friedman statistical tests are used to evaluate our algorithm. The results show that our algorithm obtains better performance and faster running speed compared with quite a few state-of-the-art competitive algorithms. In addition, experimental results on Minimum Spanning Tree and K-means clustering optimization show that our algorithm can cope with these two problems better than the comparison algorithms.     

受限亚音速气流中倒置悬臂壁板静气弹稳定性的理论及实验研究

板壳结构在航空航天、高速列车、能量采集等诸多工程领域已经得到了广泛应用. 将悬臂壁板倒置于轴向气流中并在壁板周围流场中设置刚性壁面可有效地调控壁板的失稳速度, 是俘能器优化设计的重要措施之一. 但针对刚性壁面作用下亚音速气流中倒置悬臂壁板的失稳机制仍需要开展深入研究. 本文以受限亚音速气流中倒置的二维悬臂壁板为对象, 以理论分析及风洞实验为手段, 研究了单侧刚性壁面效应对倒置悬臂壁板静态失稳特性的影响规律. 在理论分析中, 首先应用镜像函数法来处理壁面约束条件, 基于算子理论研究获得了以Possio积分方程为表征的壁板气动力, 壁面效应实际表征为一包含移位Tricomi算子的复合算子; 然后将壁板失稳方程的求解问题转化为定区间上的函数逼近问题; 最后, 依据Wererstrass定理并利用最小二乘法求解该最优函数, 以获得系统的失稳临界参数. 在试验研究中依据压杆稳定原理设计了壁板静态失稳的测试方法并完成了风洞实验. 理论分析结果表明, 壁板会发生发散(静气动弹性)失稳, 临界动压随壁板与壁面间距的增加而增大并最终趋于稳定(无壁面情况); 通过理论与风洞实验结果的对比分析, 验证了本文气动力及理论分析的适用性及准确性. 针对倒置悬臂壁板结构的气动弹性失稳问题, 本文提出的方法不涉及系统方程的离散及特征值求解问题, 而是将其转化为了定区间上的函数逼近问题进行求解, 这为弹性结构静气动弹性失稳问题的研究提供了一个可行的新思路.      

运用三维离散元技术模拟落锤撞击下奥克托今颗粒的点火燃烧过程

炸药颗粒的点火燃烧过程一直是人们关注的热点问题。近年来，三维离散元技术在中尺度观测颗粒材料的动力学过程中拥有显著优势。炸药燃烧属于颗粒材料的反应动力学，运用三维离散元技术(DM3)可以有效地观测炸药燃烧传播的过程。以奥克托今(HMX)颗粒为例，本文成功模拟并观测到了HMX颗粒的燃烧反应程度，确定了颗粒开始燃烧反应的时间，以及燃烧反应传播的时间。同时，结合落锤冲击颗粒的三维图像以及其表观压强和放热功率，得到了HMX颗粒燃烧反应、燃烧传播的整个反应动力学过程，包括颗粒在冲击加载下碎化塑性变形的过程，颗粒燃烧反应放热的过程，落锤回弹颗粒喷射的过程等。同时，进一步说明了尖顶颗粒更利于颗粒点火，平顶颗粒有抑制颗粒点火的能力。